Software version needed for 6 Speed & Cruise Control?
- torque777
- Hyper Poster
- Posts: 5377
- Joined: Wed May 28, 2014 12:47 pm
- Engine size/power: 1.4 16V Petrol (79bhp)
- Location: Shropshire
Re: Software version needed for 6 Speed & Cruise Control?
How does the ecu recognise gears? And what's different about later ecu and older type?
- dizzee stuff
- Hyper Poster
- Posts: 868
- Joined: Sun Aug 03, 2014 5:52 pm
- Engine size/power: 1.9 TDI (104bhp)
Re: Software version needed for 6 Speed & Cruise Control?
apparently it compares road speed to engine RPM. I asked the same question.
- Doc
- Not God, just a bellend
- Posts: 18504
- Joined: Thu Jan 01, 1970 1:00 am
- Engine size/power: 2.0TSI EA888 Gen3
- Location: Monaghan, Ireland & Derbyshire, UK
Re: Software version needed for 6 Speed & Cruise Control?
ECU might not "know" which gear but it will have RPM v's speed curve.
Try knocking it out of gear without clutching, I'll guarantee the cruise will turn off.
Try knocking it out of gear without clutching, I'll guarantee the cruise will turn off.
2013 Caddy with EA888 Gen3 2.0TSI DSG, Superplus MSP19 , Caddy4 rear lights, Polo GTI (mk7 style) steering wheel, Relentless Tuning front coilovers, Audi A6 S-Line front seats, Boxster fronts & GTI rear Brakes, 3D Colour Premium dash cluster, Caddy life arm rest, Motexion bulkhead, MIB head unit
All posts written by me are the intellectual property of the caddy2K forum and I do not consent to copying or redistribution of any sort
-
- Caddy Fan
- Posts: 53
- Joined: Thu Sep 10, 2015 8:09 am
- Engine size/power: 1.0 TSI (100bhp)
Re: Software version needed for 6 Speed & Cruise Control?
Can anyone with it working provide a scan please?
- spacewalker
- Hyper Poster
- Posts: 1258
- Joined: Thu Mar 10, 2011 9:09 am
- Engine size/power: 1.2 TSI (103bhp)
- Location: EU
Re: Software version needed for 6 Speed & Cruise Control?
My caddy 2004 2.0 SDI BDJ engine factory made with 5th gear. I did gear swap to 6th, ECU is not remap (only 51Kw) , but accept coding for 6th gear.
ECU must know gear ratio - to - rpm speed - to engine load / toque.
if something is abnormal - ccs is OFF
Imagine a car with 60 Mph / 800rpm (technically possible) but abnormal for ECU
Some ECUs require 7th gear ratio coding, because must understand ratio/speed/load on 7th,
ECU must know gear ratio - to - rpm speed - to engine load / toque.
if something is abnormal - ccs is OFF
Imagine a car with 60 Mph / 800rpm (technically possible) but abnormal for ECU
Some ECUs require 7th gear ratio coding, because must understand ratio/speed/load on 7th,
....
- Adam87
- Hyper Poster
- Posts: 2153
- Joined: Sat May 28, 2011 1:00 am
- Engine size/power: 1.2 TSI (84bhp)
Re: Software version needed for 6 Speed & Cruise Control?
Definitely correct as doc says, my clutch slipped going up a steep motorway hill and the second it started the ccs knocked off because revs high and speed didn't rise
-
- Caddy Fan
- Posts: 53
- Joined: Thu Sep 10, 2015 8:09 am
- Engine size/power: 1.0 TSI (100bhp)
Software version needed for 6 Speed & Cruise Control?
Yeh we know the ECU needs to know the fact 6 speed is fitted, otherwise it wouldnt have coding for it, what i need to know is what ECUs and software versions work/ take the 6 speed coding on a 2007 van?
Last edited by Gaz-M on Fri Sep 18, 2015 4:21 pm, edited 1 time in total.
-
- Caddy Fan
- Posts: 53
- Joined: Thu Sep 10, 2015 8:09 am
- Engine size/power: 1.0 TSI (100bhp)
Re: Software version needed for 6 Speed & Cruise Control?
Also, is it a VW visit for software or any other option?
- northern8019
- Hyper Poster
- Posts: 864
- Joined: Tue Jan 29, 2013 4:48 pm
- Engine size/power: 1.9 TDI (104bhp)
- Location: Lake District
Re: Software version needed for 6 Speed & Cruise Control?
I'd say if you having massive issues coding and installing it yourself
See a specialist
My 07' plate van that I fitted CC, highline steering wheel control module etc to
It runs LIN software 1.3
And the CC code you need is 11463 I think off hand
See a specialist
My 07' plate van that I fitted CC, highline steering wheel control module etc to
It runs LIN software 1.3
And the CC code you need is 11463 I think off hand
1.9tdi / Calibre CR3 / Lowered-Axle Flip / RNS510 / GTD Seats / Touran Rear Setup
6sp / Touran Bumper / Fogs / Highline Dash / CC / MFSW / Touran Leather Centre Console / now in the 200+bhp club
6sp / Touran Bumper / Fogs / Highline Dash / CC / MFSW / Touran Leather Centre Console / now in the 200+bhp club
-
- Caddy Fan
- Posts: 53
- Joined: Thu Sep 10, 2015 8:09 am
- Engine size/power: 1.0 TSI (100bhp)
Re: Software version needed for 6 Speed & Cruise Control?
Everything was already installed and working, just not CC in 6th!!!!!!
The ECU wont accept coding for 6 speed.
So we need a software update, but im asking what ECU and software versions work......
The ECU wont accept coding for 6 speed.
So we need a software update, but im asking what ECU and software versions work......
- Adam87
- Hyper Poster
- Posts: 2153
- Joined: Sat May 28, 2011 1:00 am
- Engine size/power: 1.2 TSI (84bhp)
Re: Software version needed for 6 Speed & Cruise Control?
I think your missing the point northern8019, some people can't have it working because the engine ecu doesn't accept 6th gear coding because it's not built into its software, you like me and some others were lucky that ours did
-
- Caddy2k Groupie
- Posts: 10
- Joined: Mon Jul 18, 2016 8:36 am
- Engine size/power: 1.4 16V Petrol (79bhp)
Re: Software version needed for 6 Speed & Cruise Control?
hi, did you solve your problem with coding for 6 speed gearbox? how? i have exactly that same problem after swap from 5 to 6 speed gearbox.
-
- Caddy2k Groupie
- Posts: 2
- Joined: Wed Jun 30, 2021 7:15 pm
- Engine size/power: 1.9 TDI (104bhp)
Re: Software version needed for 6 Speed & Cruise Control?
I don´t have a caddy but i had the very same problem on my Golf mk5 1.9TDI BXE engine after a 6 speed Gearbox conversion and the solution was to downgrade the OEM ECU from 03G906021KH /03G906021AN 9245 Revision :H06 to 03G906021KH /03G906021AN 8984 Revision:H02,
hope the info helps
hope the info helps
-
- Caddy2k Groupie
- Posts: 1
- Joined: Fri Mar 29, 2024 5:34 pm
- Engine size/power: 2.0 CNG (107bhp)
Re: Software version needed for 6 Speed & Cruise Control?
I have the same problem. I have 2.0 BSX engine with cng and petrol. I retrofited 5 gears to 6 gears. With red maxidot cruise control worked fine in all gears, but now I put some black & white instrument cluster and I don't have cruise control in 6th gear. I will attach bellow the HW and SW I have now
https://storage.rcs-rds.ro/links/c4a7d7 ... b0d6d324a2
https://storage.rcs-rds.ro/links/c4a7d7 ... b0d6d324a2