Toffee delights

Show off your caddy
User avatar
Lister79
Hyper Poster
Posts: 2133
Joined: Fri Jan 20, 2017 8:38 pm
Engine size/power: 2.0TSI EA888 Gen3
Location: Lake District

Re: Toffee delights

Post by Lister79 »

Had a drive out to a local cars and coffee event today with a couple of mates including traitor @Dav02 who decided to take his Fiesta instead of his van.

Image


Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods :D
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
snuffegull
100BHP+
Posts: 148
Joined: Thu Feb 02, 2023 9:39 pm
Engine size/power: 2.0 TDI (140bhp)
Location: Sweden

Re: Toffee delights

Post by snuffegull »

Im really liking it on the audi wheels!
User avatar
Dav02
Twin Turbo poster
Posts: 392
Joined: Thu Aug 09, 2018 10:11 pm
Location: Lake District

Re: Toffee delights

Post by Dav02 »

:lol: absolute bell :arrow: :lol:

Unfortunately the van would have been a much slower drive out and certainly no match to two EA888's
I had a fun drive out anyway, can't beat a bit of power...... all under 60mph of course :roll: :?:
2016 Caddy Highline. 2.0 TDi 102ps (ReMapped to 180)

Build Thread
Nath&Alex
Caddy Fan
Posts: 73
Joined: Sun Jan 17, 2021 10:51 pm

Re: Toffee delights

Post by Nath&Alex »

Sorry for digging up an old post Chris...

Am I right in saying the all track is different to the standard mk4 bumper? from what I saw on LLLParts it has extra cut outs I'm assuming for the lower spoiler?

I was told the other day you can just fit the lower spoiler from the all track over a standard mk4 which I don't believe to be true
Last edited by Lister79 on Sat Apr 27, 2024 5:25 pm, edited 1 time in total.
Reason: Quote removed
2012 Caddy 1.6 TDI Match, lowered with Stance+ coilovers and 18“ John Brown steel wheels
User avatar
Lister79
Hyper Poster
Posts: 2133
Joined: Fri Jan 20, 2017 8:38 pm
Engine size/power: 2.0TSI EA888 Gen3
Location: Lake District

Re: Toffee delights

Post by Lister79 »

Yeah that’s correct the Alltrack upper has a lot of cutouts in it to accommodate the lower section and splitter.
It might be possible to just cut all the tabs off the Alltrack lower part and bond it on, but it’s not something I looked at, or considered doing so can’t confirm if it’s possible sorry.


Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods :D
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Nath&Alex
Caddy Fan
Posts: 73
Joined: Sun Jan 17, 2021 10:51 pm

Re: Toffee delights

Post by Nath&Alex »

Do you still have a record of the part number?

There are two numbers on LLL Parts for the bumper which are 2K5807417G GRU and 2K5807417F GRU. From their descriptions I'm guessing the G comes without parking sensor holes where as the F does?

But by the looks of your thread the lower all track spoiler requires the parking sensor holes punching through?

Sorry for all the questions...
2012 Caddy 1.6 TDI Match, lowered with Stance+ coilovers and 18“ John Brown steel wheels
User avatar
Lister79
Hyper Poster
Posts: 2133
Joined: Fri Jan 20, 2017 8:38 pm
Engine size/power: 2.0TSI EA888 Gen3
Location: Lake District

Re: Toffee delights

Post by Lister79 »

G is the correct bumper. The part numbers used can be found here:

https://www.caddy2k.com/forum/viewtopic ... 50#p128050

Yeah you will need to add the parking sensor holes to the lower spoiler section, the specific punch’s make a neat hole and they are pre marked on the back to make things easy.


Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods :D
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Nath&Alex
Caddy Fan
Posts: 73
Joined: Sun Jan 17, 2021 10:51 pm

Re: Toffee delights

Post by Nath&Alex »

More questions, sorry Chris :mrgreen:

You don't happen to have a picture of the part number for the heater controls with heated seats? I know you've no longer got this as you have climatronic or what ever its called :?
Last edited by Lister79 on Sat Apr 27, 2024 5:25 pm, edited 1 time in total.
Reason: Quote removed
2012 Caddy 1.6 TDI Match, lowered with Stance+ coilovers and 18“ John Brown steel wheels
User avatar
Lister79
Hyper Poster
Posts: 2133
Joined: Fri Jan 20, 2017 8:38 pm
Engine size/power: 2.0TSI EA888 Gen3
Location: Lake District

Re: Toffee delights

Post by Lister79 »

I don’t sorry, but all information for heated seats can be found here:

https://www.caddy2k.com/forum/viewtopic.php?t=22625


Sent from my iPhone using Tapatalk
2014 Toffee Brown with EA888 Gen 3 2.0 TSi (CJX) engine (417.5 BHP 545 Nm), Grinds/ABP air suspension and a few other mods :D
Build thread:
http://caddy2k.com/forum/viewtopic.php?f=13&t=36629
Post Reply