Hi guys,
I would like to ask you if you have any information where to put "old" halogen DRL wires to new pins (supporting LED DRL) in new BCM after changing lamps to bi-xenon LED. My old BCM was 086P and now I have 087 AC Z15. After I swap BCM my LED lights was working ok (old wiring was halogen DRL in black connector pin 6 and the second one was in brown connector, now I don't remember the pin number), but a friend of mine who helped me in this retrofitting told me that those pins should be moved to new pins in new BCM supporting LED DRL. Someone from RossTech forum helped me with pinouts description in which I found that Right and Left DRL bulbs are in PIN 6 and 28 in Black connector. But he wasn't sure if Caddy has the same pinouts. Maybe I shouldn't touch/move any DRL pins in Caddy after retrofiting bixenons with LED?
Another thing is Coding Byte18 in BCM. Should it be 74 (for 2012 caddy with bixenons led) or something else?
Caddy 2012 bi-xenons with LED
-
MartyPL
- 100BHP+
- Posts: 173
- Joined: Fri Oct 03, 2014 8:17 pm
- Engine size/power: 1.2 TSI (84bhp)
- Location: Poland
-
stan-the-man
- Hyper Poster
- Posts: 1464
- Joined: Tue May 13, 2014 9:41 am
- Engine size/power: 1.4 16V Petrol (74bhp)
- Location: IRL Co.Clare/PL Gdansk
Re: Caddy 2012 bi-xenons with LED
Here is the complete BCM pinout for FL Caddy. You should be able to find what you looking for 
Activation in VCDS can be tricky for many different things. I actually came across few weird ones myself, for example when fitting interior monitoring I had to select the switch being in drivers door, not the pillar as it is as it wouldnt work otherwise...even when pillar option was also there
Remember to save the VCDS scan for the module you will be working on before you change anything too
Connector assigment:
52-pin connector -T52a- black -A-
1 - Fuse 26 on fuse holder B -SB26- (Terminal 30L)
t Left fog light bulb -L22-
t Rear left fog light bulb -L46- or rear right fog light bulb -L47-
t Left day driving light bulb -L174-
t Right side light bulb -M3-
t Left tail light bulb -M4-
t Front left turn signal bulb -M5-
t Rear right turn signal bulb -M8-
t Right brake light bulb -M10-
t Left reversing light bulb -M16-
t Right side mounted turn signal bulb -M19-
t Left dipped beam bulb -M29-
t Left main beam bulb -M30-
2 - Vacant
3 - Right side mounted turn signal bulb -M19-
4 - Left side mounted turn signal bulb -M18-
5 - Left main beam bulb -M30-
6 - Left day driving light bulb -L174- (Twin filament bulb)
7 - Vacant
8 - Vacant
9 - Rear right turn signal bulb -M8-
10 - Front left turn signal bulb -M5-
11 - Left dipped beam bulb -M29-
12 - Luggage compartment light switch -F5- , Rear lid lock unit -F256- , Luggage compartment light -W3-
13 - Rear lid handle release button -E234-
14 - Bonnet contact switch -F266-
15 - Rear right central locking lock unit -F223-
16 - Reversing light switch -F4-
17 - Rear fog light switch -E18-
18 - Light switch -E1- (Position 0)
19 - Light switch -E1- (Side light)
20 - Light switch -E1- (Assistance light)
21 - Fog light switch -E7-
22 - Light switch -E1- (Dipped beam)
23 - Earth connection 1, in front left wiring harness -82-
24 - Fuse 3 on fuse holder B -SB3- (Terminal 30_REF)
25 - Left fog light bulb -L22-
26 - Right brake light bulb -M10-
27 - Left tail light bulb -M4- (Twin filament bulb)
28 - Left reversing light bulb -M16-
29 - Rear lid contact switch -F111- , Rear lid lock unit -F256-
30 - Rear right door contact switch -F11-
31 - Vacant
32 - Vacant
33 - Rear lid lock unit -F256-
34 - Rear left central locking lock unit -F222-
35 - Heater/heat output switch -E16-
36 - Interior monitoring deactivation switch -E267-
37 - Vacant
38 - Rear left central locking lock unit -F222-
39 - Vacant
40 - Rear right central locking lock unit -F223-
41 - Rear left door contact switch -F10-
42 - Earth connection 4, in main wiring harness -369- (Terminal 31ZV)
43 - Washer pump -V5- , Rear window wiper motor -V12- , Windscreen and rear window washer pump -V59-
44 - Right side light bulb -M3- (Twin filament bulb)
45 - High level brake light bulb -M25-
46 - Rear lid lock unit -F256-
47 - Vacant
48 - Rear left central locking lock unit -F222-
49 - Rear right central locking lock unit -F223-
50 - Vacant
51 - Vacant
52 - Vacant
52-pin connector -T52b- white-B-
1 - Fuse 50 on fuse holder C -SC50- (Terminal 30_ZV)
2 - Washer pump -V5- , Rear window wiper motor -V12- , Windscreen and rear window washer pump -V59-
3 - Vacant
4 - Vacant
5 - Rear lid lock unit -F256-
6 - Vacant
7 - Rear left central locking lock unit -F222-
8 - Rear right central locking lock unit -F223-
9 - Vacant
10 - Vacant
11 - Rear lid release motor -V139-
12 - Terminal 15 voltage supply relay -J329-
13 - Vacant
14 - Heater/heat output switch -E16-
15 - Switches and instruments illumination regulator -E20-
16 - Vacant
17 - Vacant
18 - Vacant
19 - Vacant
20 - Vacant
21 - Heated front seats control unit -J774-
22 - Heated rear window relay -J9-
23 - Vacant
24 - Hazard warning lights button -E229-
25 - Vacant
26 - Vacant
27 - Vacant
28 - X-contact relief relay -J59-
29 - Engine control unit -J623- , Terminal 50 voltage supply relay -J682-
30 - Switches and instruments illumination regulator -E20-
31 - Vacant
32 - Vacant
33 - Wiper motor control unit -J400- , Rain and light detector sensor -G397- (Lin-Bus)
34 - Vacant
35 - Vacant
36 - Alarm horn -H12- , Interior monitoring sensor -G273- , Vehicle inclination sender -G384-
37 - Interior monitoring deactivation switch -E267-
38 - Fuel pump relay -J17-Fuel supply relay -J643-
39 - Vacant
40 - Headlight washer system relay -J39-
41 - Horn relay -J413-
42 - Fuse 46 on fuse holder C -SC46- (Terminal 30P)
t Front interior light -W1-
t Luggage compartment light -W3-
t Glove compartment light -W6-
t Rear interior light -W43-
43 - (Terminal 30G)
t Front interior light -W1-
t Luggage compartment light -W3-
t Glove compartment light -W6-
t Rear interior light -W43-
44 - Vacant
45 - Vacant
46 - Vacant
47 - Vacant
48 - Vacant
49 - Vacant
50 - Rear left fog light bulb -L46- (Twin filament bulb) or rear right fog light bulb -L47- (Twin filament bulb)
51 - Light switch -E1-
t Connection 1 (58d), in main wiring harness -B340-
t Heater/heat output switch -E16-
t Switches and instruments illumination regulator -E20-
t Headlight range control regulator -E102-
t TCS and ESP button -E256-
t Stop/start system button -E693-
t Telephone bracket -R126-
t Cigarette lighter -U1-
52 - Earth connection 18, in main wiring harness -383-
52-pin connector -T52c- brown-C-
1 - Fuse 24 on fuse holder C -SC24- (Terminal 30DWA)
t Alarm horn -H12-
t Interior monitoring sensor -G273-
2 - Vacant
3 - Right tail light bulb -M2- (Twin filament bulb)
4 - Left brake light bulb -M9-
5 - Earth connection 4, in main wiring harness -369-
6 - Vacant
7 - Hazard warning lights button -E229-
8 - Vacant
9 - Vacant
10 - Front interior light -W1- , Rear interior light -W43-
11 - Vacant
12 - Vacant
13 - Steering column electronics control unit -J527-
t Ignition/starter switch -D- (Terminal S)
14 - Steering column electronics control unit -J527-
t Ignition/starter switch -D- (Terminal 50)
15 - Data bus diagnostic interface -J533-
t Connection 1 (convenience CAN bus, high), in main wiring harness -B397-
16 - Data bus diagnostic interface -J533-
t Connection 1 (convenience CAN bus, low), in main wiring harness -B406-
17 - Brake light switch -F-
t ABS control unit -J104-
t Trailer detector control unit -J345-
t Engine control unit -J623-
18 - Vacant
19 - Vacant
20 - Vacant
21 - Vacant
22 - Vacant
23 - Vacant
24 - Vacant
25 - Right fog light bulb -L23-
26 - Left side light bulb -M1- (Twin filament bulb)
27 - Number plate light -X-
28 - Right reversing light bulb -M17-
29 - Vacant
30 - Clutch position sender -G476- or mechatronic unit for dual clutch gearbox -J743-
31 - Steering column electronics control unit -J527-
t Ignition/starter switch -D- (Terminal 15)
32 - Alternator -C-
33 - Vacant
34 - Starter relay 1 -J906-
35 - Switches and instruments illumination regulator -E20-
36 - Vacant
37 - Vacant
38 - Vacant
39 - Vacant
40 - Vacant
41 - Vacant
42 - Fuse 16 on fuse holder B -SB16- (Terminal 30R)
t Right fog light bulb -L23-
t Rear left fog light bulb -L46- or rear right fog light bulb -L47-
t Right day driving light bulb -L175-
t Left side light bulb -M1-
t Right tail light bulb -M2-
t Rear left turn signal bulb -M6-
t Front right turn signal bulb -M7-
t Left brake light bulb -M9-
t Right reversing light bulb -M17-
t Left side mounted turn signal bulb -M18-
t High level brake light bulb -M25-
t Right dipped beam bulb -M31-
t Right main beam bulb -M32-
43 - Vacant
44 - Vacant
45 - Vacant
46 - Right main beam bulb -M32-
47 - Right day driving light bulb -L175- (Twin filament bulb)
48 - Vacant
49 - Vacant
50 - Front right turn signal bulb -M7-
51 - Rear left turn signal bulb -M6-
52 - Right dipped beam bulb -M31-
Activation in VCDS can be tricky for many different things. I actually came across few weird ones myself, for example when fitting interior monitoring I had to select the switch being in drivers door, not the pillar as it is as it wouldnt work otherwise...even when pillar option was also there
Remember to save the VCDS scan for the module you will be working on before you change anything too
Connector assigment:
52-pin connector -T52a- black -A-
1 - Fuse 26 on fuse holder B -SB26- (Terminal 30L)
t Left fog light bulb -L22-
t Rear left fog light bulb -L46- or rear right fog light bulb -L47-
t Left day driving light bulb -L174-
t Right side light bulb -M3-
t Left tail light bulb -M4-
t Front left turn signal bulb -M5-
t Rear right turn signal bulb -M8-
t Right brake light bulb -M10-
t Left reversing light bulb -M16-
t Right side mounted turn signal bulb -M19-
t Left dipped beam bulb -M29-
t Left main beam bulb -M30-
2 - Vacant
3 - Right side mounted turn signal bulb -M19-
4 - Left side mounted turn signal bulb -M18-
5 - Left main beam bulb -M30-
6 - Left day driving light bulb -L174- (Twin filament bulb)
7 - Vacant
8 - Vacant
9 - Rear right turn signal bulb -M8-
10 - Front left turn signal bulb -M5-
11 - Left dipped beam bulb -M29-
12 - Luggage compartment light switch -F5- , Rear lid lock unit -F256- , Luggage compartment light -W3-
13 - Rear lid handle release button -E234-
14 - Bonnet contact switch -F266-
15 - Rear right central locking lock unit -F223-
16 - Reversing light switch -F4-
17 - Rear fog light switch -E18-
18 - Light switch -E1- (Position 0)
19 - Light switch -E1- (Side light)
20 - Light switch -E1- (Assistance light)
21 - Fog light switch -E7-
22 - Light switch -E1- (Dipped beam)
23 - Earth connection 1, in front left wiring harness -82-
24 - Fuse 3 on fuse holder B -SB3- (Terminal 30_REF)
25 - Left fog light bulb -L22-
26 - Right brake light bulb -M10-
27 - Left tail light bulb -M4- (Twin filament bulb)
28 - Left reversing light bulb -M16-
29 - Rear lid contact switch -F111- , Rear lid lock unit -F256-
30 - Rear right door contact switch -F11-
31 - Vacant
32 - Vacant
33 - Rear lid lock unit -F256-
34 - Rear left central locking lock unit -F222-
35 - Heater/heat output switch -E16-
36 - Interior monitoring deactivation switch -E267-
37 - Vacant
38 - Rear left central locking lock unit -F222-
39 - Vacant
40 - Rear right central locking lock unit -F223-
41 - Rear left door contact switch -F10-
42 - Earth connection 4, in main wiring harness -369- (Terminal 31ZV)
43 - Washer pump -V5- , Rear window wiper motor -V12- , Windscreen and rear window washer pump -V59-
44 - Right side light bulb -M3- (Twin filament bulb)
45 - High level brake light bulb -M25-
46 - Rear lid lock unit -F256-
47 - Vacant
48 - Rear left central locking lock unit -F222-
49 - Rear right central locking lock unit -F223-
50 - Vacant
51 - Vacant
52 - Vacant
52-pin connector -T52b- white-B-
1 - Fuse 50 on fuse holder C -SC50- (Terminal 30_ZV)
2 - Washer pump -V5- , Rear window wiper motor -V12- , Windscreen and rear window washer pump -V59-
3 - Vacant
4 - Vacant
5 - Rear lid lock unit -F256-
6 - Vacant
7 - Rear left central locking lock unit -F222-
8 - Rear right central locking lock unit -F223-
9 - Vacant
10 - Vacant
11 - Rear lid release motor -V139-
12 - Terminal 15 voltage supply relay -J329-
13 - Vacant
14 - Heater/heat output switch -E16-
15 - Switches and instruments illumination regulator -E20-
16 - Vacant
17 - Vacant
18 - Vacant
19 - Vacant
20 - Vacant
21 - Heated front seats control unit -J774-
22 - Heated rear window relay -J9-
23 - Vacant
24 - Hazard warning lights button -E229-
25 - Vacant
26 - Vacant
27 - Vacant
28 - X-contact relief relay -J59-
29 - Engine control unit -J623- , Terminal 50 voltage supply relay -J682-
30 - Switches and instruments illumination regulator -E20-
31 - Vacant
32 - Vacant
33 - Wiper motor control unit -J400- , Rain and light detector sensor -G397- (Lin-Bus)
34 - Vacant
35 - Vacant
36 - Alarm horn -H12- , Interior monitoring sensor -G273- , Vehicle inclination sender -G384-
37 - Interior monitoring deactivation switch -E267-
38 - Fuel pump relay -J17-Fuel supply relay -J643-
39 - Vacant
40 - Headlight washer system relay -J39-
41 - Horn relay -J413-
42 - Fuse 46 on fuse holder C -SC46- (Terminal 30P)
t Front interior light -W1-
t Luggage compartment light -W3-
t Glove compartment light -W6-
t Rear interior light -W43-
43 - (Terminal 30G)
t Front interior light -W1-
t Luggage compartment light -W3-
t Glove compartment light -W6-
t Rear interior light -W43-
44 - Vacant
45 - Vacant
46 - Vacant
47 - Vacant
48 - Vacant
49 - Vacant
50 - Rear left fog light bulb -L46- (Twin filament bulb) or rear right fog light bulb -L47- (Twin filament bulb)
51 - Light switch -E1-
t Connection 1 (58d), in main wiring harness -B340-
t Heater/heat output switch -E16-
t Switches and instruments illumination regulator -E20-
t Headlight range control regulator -E102-
t TCS and ESP button -E256-
t Stop/start system button -E693-
t Telephone bracket -R126-
t Cigarette lighter -U1-
52 - Earth connection 18, in main wiring harness -383-
52-pin connector -T52c- brown-C-
1 - Fuse 24 on fuse holder C -SC24- (Terminal 30DWA)
t Alarm horn -H12-
t Interior monitoring sensor -G273-
2 - Vacant
3 - Right tail light bulb -M2- (Twin filament bulb)
4 - Left brake light bulb -M9-
5 - Earth connection 4, in main wiring harness -369-
6 - Vacant
7 - Hazard warning lights button -E229-
8 - Vacant
9 - Vacant
10 - Front interior light -W1- , Rear interior light -W43-
11 - Vacant
12 - Vacant
13 - Steering column electronics control unit -J527-
t Ignition/starter switch -D- (Terminal S)
14 - Steering column electronics control unit -J527-
t Ignition/starter switch -D- (Terminal 50)
15 - Data bus diagnostic interface -J533-
t Connection 1 (convenience CAN bus, high), in main wiring harness -B397-
16 - Data bus diagnostic interface -J533-
t Connection 1 (convenience CAN bus, low), in main wiring harness -B406-
17 - Brake light switch -F-
t ABS control unit -J104-
t Trailer detector control unit -J345-
t Engine control unit -J623-
18 - Vacant
19 - Vacant
20 - Vacant
21 - Vacant
22 - Vacant
23 - Vacant
24 - Vacant
25 - Right fog light bulb -L23-
26 - Left side light bulb -M1- (Twin filament bulb)
27 - Number plate light -X-
28 - Right reversing light bulb -M17-
29 - Vacant
30 - Clutch position sender -G476- or mechatronic unit for dual clutch gearbox -J743-
31 - Steering column electronics control unit -J527-
t Ignition/starter switch -D- (Terminal 15)
32 - Alternator -C-
33 - Vacant
34 - Starter relay 1 -J906-
35 - Switches and instruments illumination regulator -E20-
36 - Vacant
37 - Vacant
38 - Vacant
39 - Vacant
40 - Vacant
41 - Vacant
42 - Fuse 16 on fuse holder B -SB16- (Terminal 30R)
t Right fog light bulb -L23-
t Rear left fog light bulb -L46- or rear right fog light bulb -L47-
t Right day driving light bulb -L175-
t Left side light bulb -M1-
t Right tail light bulb -M2-
t Rear left turn signal bulb -M6-
t Front right turn signal bulb -M7-
t Left brake light bulb -M9-
t Right reversing light bulb -M17-
t Left side mounted turn signal bulb -M18-
t High level brake light bulb -M25-
t Right dipped beam bulb -M31-
t Right main beam bulb -M32-
43 - Vacant
44 - Vacant
45 - Vacant
46 - Right main beam bulb -M32-
47 - Right day driving light bulb -L175- (Twin filament bulb)
48 - Vacant
49 - Vacant
50 - Front right turn signal bulb -M7-
51 - Rear left turn signal bulb -M6-
52 - Right dipped beam bulb -M31-
-
MartyPL
- 100BHP+
- Posts: 173
- Joined: Fri Oct 03, 2014 8:17 pm
- Engine size/power: 1.2 TSI (84bhp)
- Location: Poland
Re: Caddy 2012 bi-xenons with LED
Thanks a lot. So now I think the first stage is complete LED in 0 and dimmed in park lights position. When turn signal is on LED is off. I forgot to check if LED is on (or on but dimmed when low beam lights are on). BTW should LEDs be on or off when low beam lights are active?
Second step is to find a solution to my 55 Xenon Range Module. Maybe I've got some bad wiring to CAN gateway?
Here is my problem. When I connect VCDS I've got errors (see autoscan). When I clear all faults I got static cornering light working ok and high beam lights (shutter works) working. Dynamic cornering doesn't work. When I move my steering wheel xenons are not moving left or right. When I go to Adaptation (in 55 xenon module range) and select Presentation Mode I see how lights move following my steering wheel moves. When I start the engine and go for about 10m it stops working. I still have static cornering and high beams active. When I turn the engine off and take off the key and put it back to ON I don't have high beams and static cornering works for about few minutes when driving. If someone could help me also with correct wiring the range module and auto leveling sensor to CAN gateway and where else it should be placed. I've got everything connected but maybe Caddy has something different in wiring then any other popular VW models.
Second step is to find a solution to my 55 Xenon Range Module. Maybe I've got some bad wiring to CAN gateway?
Here is my problem. When I connect VCDS I've got errors (see autoscan). When I clear all faults I got static cornering light working ok and high beam lights (shutter works) working. Dynamic cornering doesn't work. When I move my steering wheel xenons are not moving left or right. When I go to Adaptation (in 55 xenon module range) and select Presentation Mode I see how lights move following my steering wheel moves. When I start the engine and go for about 10m it stops working. I still have static cornering and high beams active. When I turn the engine off and take off the key and put it back to ON I don't have high beams and static cornering works for about few minutes when driving. If someone could help me also with correct wiring the range module and auto leveling sensor to CAN gateway and where else it should be placed. I've got everything connected but maybe Caddy has something different in wiring then any other popular VW models.
Code: Select all
Friday,10,October,2014,12:19:13:53737
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 14.8.1.0 (x64)
Data version: 20140905
VIN: WV2ZZZ2KZCX——— License Plate: ———
Mileage: 52900km-32870mi Repair Order:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 2K (7N0)
Scan: 01 03 08 09 10 15 16 17 19 25 2E 37 42 44 46 4C 52 55 56
VIN: WV2ZZZ2KZCX—— Mileage: 52900km-32870miles
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: Malfunction 0010
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2E-Media Player 3 -- Status: OK 0000
37-Navigation -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
4C-Tire Pressure II -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
55-Headlight Range -- Status: Malfunction 0010
56-Radio -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CAYD) Labels: 03L-906-023-CAY.clb
Part No SW: 03L 906 023 PC HW: 03L 907 425 C
Component: 1,6l R4 CR td H43 0869
Revision: --H43--- Serial number: 00000000000000
Coding: 00114016032400080000
Shop #: WSC 00770 259 101583
ASAM Dataset: EV_ECM16TDI02103L906023PC 003002
ROD: EV_ECM16TDI02103L906023DB.rod
VCID: 76E3C036C916D48AF3-8023
No fault code found.
Readiness: 0000 0000
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: 1K0-907-379-60EC1F.clb
Part No SW: 1K0 907 379 BJ HW: 1K0 907 379 BJ
Component: ESP MK60EC1 H31 0121
Revision: 00H31001
Coding: 423C400D092303FA420B02E7901DC0413105F0
Shop #: WSC 00485 046 02308
VCID: 7BF5D102FA3489E28C-802E
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255) Labels: 5K0-907-044.clb
Part No SW: 5K0 907 044 ER HW: 5K0 907 044 ER
Component: Climatronic H18 1112
Revision: 00001004
Coding: 0000004002
Shop #: WSC 35110 790 50316
ASAM Dataset: EV_Climatronic A01010
ROD: EV_ClimaAutoBasis_SE36.rod
VCID: 7F0D2512E62C95C2A0-802A
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels: 1K0-937-08x-09.clb
Part No SW: 5K0 937 087 AC HW: 5K0 937 087 AC
Component: BCM PQ35 H+ 122 0174
Revision: BF122001
Coding: 411A0A38E025D36B08880080840009E403747408727D8160E48440000049
Shop #: WSC 00485 046 02308
VCID: 76E3C036C116D48AF3-8023
Subsystem 1 - Part No: 1T1 955 119 A Labels: 1KX-955-119.CLB
Component: Wischer 19011 26 0512
Coding: 0097B5
Subsystem 2 - Part No: 1K0 955 559 AH Labels: 1K0-955-559-AG.CLB
Component: RLS 060612 05 54 0403
Coding: 0730ED
Subsystem 3 - Part No: 7N0 951 171 A
Component: DWA-Sensor 00 002 0206
Coding: 000000
Subsystem 4 - Part No: 1K0 951 605 C
Component: LIN BACKUP HO H05 1501
Coding: 000000
No fault code found.
-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J791) Labels: 3AA-919-475.clb
Part No SW: 3AA 919 475 K HW: 4H0 919 475 E
Component: PARKHILFE PLA H06 0031
Revision: -------- Serial number: 56261221500198
Coding: 148001
Shop #: WSC 00485 046 02308
ASAM Dataset: EV_EPHVA2C000000000 002011
ROD: EV_EPHVA2C000000000_VN35.rod
VCID: 438569E2CA44312284-8016
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels: 5K0-959-655.clb
Part No SW: 2H0 959 655 B HW: 2H0 959 655 B
Component: VW10Airbag01P H06 0013
Revision: -------- Serial number: 003HN006Y052
Coding: 000000000000000000000000000000003150
Shop #: WSC 35110 790 50316
ASAM Dataset: EV_AirbaVW10BPAVN750 A01026
ROD: EV_AirbaVW10BPAVN750_SE12.rod
VCID: 336539229AE481A214-8066
Crash sensor for side airbag; driver side:
Serial number: 3495RRB40570VC0I6H5J
Crash sensor for side airbag; front passenger side:
Serial number: 3505RRB404R0V8BO8OQU
No fault code found.
-------------------------------------------------------------------------------
Address 16: Steering wheel (J527) Labels: 5K0-953-569.clb
Part No SW: 5K0 953 507 BC HW: 5K0 953 549 E
Component: Lenks.Modul 008 0080
Revision: -------- Serial number: 90440KK7001MR
Coding: 108A140000
Shop #: WSC 00485 046 02308
ASAM Dataset: EV_SMLSNGKUDS A05001
ROD: EV_SMLSNGKUDS_SE36.rod
VCID: 72EBFC26A57EC8AADF-8027
Multi Function Steering Wheel Control Module:
Subsystem 1 - Part No SW: 5K0 959 542 C HW: 5K0 959 542 C Labels: 3C8-959-537.CLB
Component: E221__MFL-TAS H31 0037
Serial number: 0394858
Coding: 820000
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb
Part No SW: 1T0 920 871 D HW: 1T0 920 871 D
Component: KOMBI H20 0420
Serial number: 00000000000000
Coding: 181A00
Shop #: WSC 85046 004 02308
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04086
ROD: EV_Kombi_UDS_VDD_RM09_SE25.rod
VCID: 34673A3E9FEA869A0D-8061
1 Fault Found:
10485825 - Internal Control Module Memory Check Sum Error
B2000 41 [137] - General checksum failure
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels: 7N0-907-530-V2.clb
Part No SW: 7N0 907 530 AK HW: 7N0 907 530 AK
Component: J533 Gateway X57 X641
Revision: X57 Serial number: 240812F2001728
Coding: 357402
Shop #: WSC 35110 377 00141
VCID: 79F9CB0AF008BBF29E-802C
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels: 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H20 0420
Serial number: 00000000000000
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03008
ROD: EV_Immo_UDS_VDD_RM09_SE25.rod
VCID: 6ADBE4468DAE006A67-803F
No fault code found.
-------------------------------------------------------------------------------
Address 2E: Media Player 3 (J650) Labels: 5N0-035-342.lbl
Part No SW: 5N0 035 342 G HW: 5N0 035 342 G
Component: SG EXT.PLAYER H19 0770
Revision: A1001003 Serial number: 7665894085
Coding: 020100
Shop #: WSC 05314 000 00001
VCID: 2B5521424AD4D9625C-807E
No fault code found.
-------------------------------------------------------------------------------
Address 37: Navigation (J794) Labels: 1K0-035-27x-37.clb
Part No SW: 3C0 035 279 M HW: 3C0 035 279 M
Component: RNS315-EU H52 0319
Serial number: VWZAZ2M5981505
Coding: 000104110200000000051002
Shop #: WSC 00485 046 02308
ASAM Dataset: EV_RNS315EUV2UDS 001705
ROD: EV_RNS315EUV2UDS.rod
VCID: 2D512F5A7CC0D75242-8078
Data medium:
Subsystem 1 - Part No: 3AA 919 866
Component: EUR_W_0038 0038
No fault code found.
-------------------------------------------------------------------------------
Address 42: Door Elect, Driver Labels: 1K0-959-701-MIN3.lbl
Part No SW: 1T0 959 701 T HW: 1T0 959 701 T
Component: Tuer-SG 009 2109
Coding: 0000048
Shop #: WSC 35110 377 08192
VCID: 489F7ECE3B62127A51-801D
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 1Kx-909-14x-44.clb
Part No: 1K0 909 144 P
Component: EPS_ZFLS Kl. 140 3305
Revision: 00H22000
Shop #: WSC 35110 377 08192
VCID: 377D0D32469C6D8228-8062
No fault code found.
-------------------------------------------------------------------------------
Address 4C: Tire Pressure II
Cannot be reached
-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. Labels: 1K0-959-702-MIN3.lbl
Part No SW: 1T0 959 702 R HW: 1T0 959 702 R
Component: Tuer-SG 009 2109
Coding: 0000048
Shop #: WSC 35110 377 08192
VCID: 479D7DF2367C1D0258-8012
No fault code found.
-------------------------------------------------------------------------------
Address 55: Headlight Range (J745) Labels: 5M0-907-357-V3.clb
Part No SW: 5M0 907 357 F HW: 7L6 907 357 C
Component: AFS-ECU H04 0111
Revision: -------- Serial number: --------------
Coding: 091600000F000200
Shop #: WSC 00485 046 02308
ASAM Dataset: EV_HeadlRegulVWAFSPt 002016
ROD: EV_HeadlRegulVWAFSPt.rod
VCID: 377D0D328E9C6D8228-8062
Left_headlamp_power_output_stage:
Subsystem 1 - Part No SW: 1T0 941 329 A HW: 1T0 941 329 A
Component: LeiMo links H06 0007
Coding: 320000
Right_headlamp_power_output_stage:
Subsystem 2 - Part No SW: 1T0 941 329 A HW: 1T0 941 329 A
Component: LeiMo rechts H06 0007
Coding: 320000
8 Faults Found:
13679104 - Local Data Bus
U10BA 00 [008] - No Communication
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 210
Reset counter: 104
Mileage: 52824 km
Date: 2014.10.08
Time: 21:07:41
5275926 - Power Output Module for Left Headlamp
C1081 16 [008] - Voltage Too Low
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 6
Reset counter: 104
Mileage: 52868 km
Date: 2014.10.09
Time: 09:37:57
5276182 - Power Output Module for Right Headlamp
C1082 16 [008] - Voltage Too Low
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 6
Reset counter: 104
Mileage: 52827 km
Date: 2014.10.09
Time: 08:33:34
12583424 - Databus
U1201 00 [008] - No Communications
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 254
Reset counter: 104
Mileage: 52824 km
Date: 2014.10.08
Time: 21:07:41
13705474 - Databus
U1121 00 [008] - Missing Message
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 12
Reset counter: 104
Mileage: 52824 km
Date: 2014.10.08
Time: 21:07:41
13705475 - Databus
U1121 00 [008] - Missing Message
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 12
Reset counter: 104
Mileage: 52824 km
Date: 2014.10.08
Time: 21:07:41
13705477 - Databus
U1121 00 [008] - Missing Message
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 12
Reset counter: 104
Mileage: 52824 km
Date: 2014.10.08
Time: 21:07:41
13705480 - Databus
U1121 00 [008] - Missing Message
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 12
Reset counter: 104
Mileage: 52824 km
Date: 2014.10.08
Time: 21:07:41
End-------------------------(Elapsed Time: 02:49)---------------------------
stan-the-man
- Hyper Poster
- Posts: 1464
- Joined: Tue May 13, 2014 9:41 am
- Engine size/power: 1.4 16V Petrol (74bhp)
- Location: IRL Co.Clare/PL Gdansk
Re: Caddy 2012 bi-xenons with LED
My leds are on the whole time, when on sidelights setting they are on very bright, on auto they are slightly dimmed during the day and with low beam they are on too but not as strong as sidelight setting. During the day when indicating they go off depending on which side you are turning. <--- I ticked the option in VCDS for this, it wasnt set like that from factory. Hope it makes sense?
If you want I can send you the wiring diagrams for Caddy Bi-xenons, just send me a PM with your email
If you want I can send you the wiring diagrams for Caddy Bi-xenons, just send me a PM with your email
-
AutosoundBlackpool
- 200BHP+
- Posts: 218
- Joined: Sat Feb 25, 2012 8:26 pm
- Engine size/power: 1.2 TSI (84bhp)
- Location: Blackpool Lancashire
- Contact:
Re: Caddy 2012 bi-xenons with LED
Have you wired your self levelling module to a constant live or an ignition live?
I've done two full retrofits and been through it all!
I've done two full retrofits and been through it all!
The Fylde Coast No1 in-car Electrical Specialist
Cobra Autowatch JL Hertz Pheonix Gold Kenwood Steelmate Parrot
http://www.autosoundblackpool.co.uk" onclick="window.open(this.href);return false;
07973 353632[/color]
https://www.facebook.com/pages/AUTOSOUN ... 6593764755" onclick="window.open(this.href);return false;
https://www.facebook.com/groups/vwretro ... ment_reply" onclick="window.open(this.href);return false;
FREE VCDS / VAGCOM READOUT - Just call to book - QUOTE CADDY2K
MEMBER DISCOUNTS - WANT CHEAP STUFF? JUST ASK!
Cobra Autowatch JL Hertz Pheonix Gold Kenwood Steelmate Parrot
http://www.autosoundblackpool.co.uk" onclick="window.open(this.href);return false;
07973 353632[/color]
https://www.facebook.com/pages/AUTOSOUN ... 6593764755" onclick="window.open(this.href);return false;
https://www.facebook.com/groups/vwretro ... ment_reply" onclick="window.open(this.href);return false;
FREE VCDS / VAGCOM READOUT - Just call to book - QUOTE CADDY2K
MEMBER DISCOUNTS - WANT CHEAP STUFF? JUST ASK!
-
AutosoundBlackpool
- 200BHP+
- Posts: 218
- Joined: Sat Feb 25, 2012 8:26 pm
- Engine size/power: 1.2 TSI (84bhp)
- Location: Blackpool Lancashire
- Contact:
Re: Caddy 2012 bi-xenons with LED
You need these
http://www.ebay.co.uk/itm/181513830454
http://www.ebay.co.uk/itm/181513830454
The Fylde Coast No1 in-car Electrical Specialist
Cobra Autowatch JL Hertz Pheonix Gold Kenwood Steelmate Parrot
http://www.autosoundblackpool.co.uk" onclick="window.open(this.href);return false;
07973 353632[/color]
https://www.facebook.com/pages/AUTOSOUN ... 6593764755" onclick="window.open(this.href);return false;
https://www.facebook.com/groups/vwretro ... ment_reply" onclick="window.open(this.href);return false;
FREE VCDS / VAGCOM READOUT - Just call to book - QUOTE CADDY2K
MEMBER DISCOUNTS - WANT CHEAP STUFF? JUST ASK!
Cobra Autowatch JL Hertz Pheonix Gold Kenwood Steelmate Parrot
http://www.autosoundblackpool.co.uk" onclick="window.open(this.href);return false;
07973 353632[/color]
https://www.facebook.com/pages/AUTOSOUN ... 6593764755" onclick="window.open(this.href);return false;
https://www.facebook.com/groups/vwretro ... ment_reply" onclick="window.open(this.href);return false;
FREE VCDS / VAGCOM READOUT - Just call to book - QUOTE CADDY2K
MEMBER DISCOUNTS - WANT CHEAP STUFF? JUST ASK!
-
MartyPL
- 100BHP+
- Posts: 173
- Joined: Fri Oct 03, 2014 8:17 pm
- Engine size/power: 1.2 TSI (84bhp)
- Location: Poland
Re: Caddy 2012 bi-xenons with LED
Hi again, I had no time to test some "settings" so now I'm back. I had Pins 4 from headlights connectors (black cables) and the one from xenon range module (55) put in fuse box without permanent 12V. We change it (with my friend) and high beams work everytime when I turn the ignition on / off /on /off and so on, but static cornering works as it was before putting those 3 cables in fuse box to permanent 12V. So when the ignition is on and I clear all faults everything is working fine. When ignition is off and then on again it gives faults like below.
I also have High Beam Assist Mirror installed, but I have "fault: Light Assist" info on dashboard and it's not so important at the moment.
If you again have any suggestions please let me know. Thanks
@AutosoundBlackpool: I have original connectors from Touran and pins from halogens moved to new connectors so it looks OEM.
@stan-the-man: Thanks, I've got the wiring for caddy bixenons + LED and all looks ok. My LEDs when OFF and AUTO they are bright 100% and when in parking light position they are dimmed as well as during the evening/night together with Xenons. They are also OFF when turning signal left/right is ON (when no xenons).
Is there anyone with factory installed xenons+LED or working after retrofitting to place their coding? Maybe the problem is also in coding 55 Xenon Range Module?
Code: Select all
Tuesday,04,November,2014,11:25:20:53737
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 14.10.0.0 (x64)
Data version: 20141022
VIN: WV2ZZZ2K License Plate: ST11111
Mileage: 54190km-33672mi Repair Order:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 2K (7N0)
Scan: 01 03 08 09 10 15 16 17 19 20 25 2E 37 42 44 46 4C 52 55 56
VIN: WV2ZZZ2K Mileage: 54190km-33672miles
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: Malfunction 0010
19-CAN Gateway -- Status: OK 0000
20-High Beam Assist. -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2E-Media Player 3 -- Status: OK 0000
37-Navigation -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
4C-Tire Pressure II -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
55-Headlight Range -- Status: Malfunction 0010
56-Radio -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CAYD) Labels: 03L-906-023-CAY.clb
Part No SW: 03L 906 023 PC HW: 03L 907 425 C
Component: 1,6l R4 CR td H43 0869
Revision: --H43--- Serial number: 00000000000000
Coding: 00114016032400080000
Shop #: WSC 00770 259 101583
ASAM Dataset: EV_ECM16TDI02103L906023PC 003002
ROD: EV_ECM16TDI02103L906023DB.rod
VCID: 76E3C036C916D491457-8023
No fault code found.
Readiness: 0000 0000
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: 1K0-907-379-60EC1F.clb
Part No SW: 1K0 907 379 BJ HW: 1K0 907 379 BJ
Component: ESP MK60EC1 H31 0121
Revision: 00H31001
Coding: 423C400D092303FA420B02E7901DC0413105F0
Shop #: WSC 00485 046 02308
VCID: 7BF5D102FA3489F93A9-802E
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255) Labels: 5K0-907-044.clb
Part No SW: 5K0 907 044 ER HW: 5K0 907 044 ER
Component: Climatronic H18 1112
Revision: 00001004
Coding: 0000004002
Shop #: WSC 35110 790 50316
ASAM Dataset: EV_Climatronic A01010
ROD: EV_ClimaAutoBasis_SE36.rod
VCID: 7F0D2512E62C95D9161-802A
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels: 1K0-937-08x-09.clb
Part No SW: 5K0 937 087 AC HW: 5K0 937 087 AC
Component: BCM PQ35 H+ 122 0174
Revision: BF122001
Coding: 411A0A38E025D36B08880088840009E803747408727D8160E48440040049
Shop #: WSC 12345 122 11111
VCID: 76E3C036C116D491457-8023
Subsystem 1 - Part No: 1T1 955 119 A Labels: 1KX-955-119.CLB
Component: Wischer 19011 26 0512
Coding: 0097B5
Subsystem 2 - Part No: 1K0 955 559 AH Labels: 1K0-955-559-AG.CLB
Component: RLS 060612 05 54 0403
Coding: 0730ED
Subsystem 3 - Part No: 7N0 951 171 A
Component: DWA-Sensor 00 002 0206
Coding: 000000
Subsystem 4 - Part No: 1K0 951 605 C
Component: LIN BACKUP HO H05 1501
Coding: 000000
No fault code found.
-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J791) Labels: 3AA-919-475.clb
Part No SW: 3AA 919 475 K HW: 4H0 919 475 E
Component: PARKHILFE PLA H06 0031
Revision: -------- Serial number: 56261221500198
Coding: 148001
Shop #: WSC 00485 046 02308
ASAM Dataset: EV_EPHVA2C000000000 002011
ROD: EV_EPHVA2C000000000_VN35.rod
VCID: 438569E2CA443139329-8016
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels: 5K0-959-655.clb
Part No SW: 2H0 959 655 B HW: 2H0 959 655 B
Component: VW10Airbag01P H06 0013
Revision: -------- Serial number: 003HN006Y052
Coding: 000000000000000000000000000000003150
Shop #: WSC 35110 790 50316
ASAM Dataset: EV_AirbaVW10BPAVN750 A01026
ROD: EV_AirbaVW10BPAVN750_SE12.rod
VCID: 336539229AE481B9A29-8066
Crash sensor for side airbag; driver side:
Serial number: 3495RRB40570VC0I6H5J
Crash sensor for side airbag; front passenger side:
Serial number: 3505RRB404R0V8BO8OQU
No fault code found.
-------------------------------------------------------------------------------
Address 16: Steering wheel (J527) Labels: 5K0-953-569.clb
Part No SW: 5K0 953 507 BC HW: 5K0 953 549 E
Component: Lenks.Modul 008 0080
Revision: -------- Serial number: 90440KK7001MR
Coding: 108A140000
Shop #: WSC 00485 046 02308
ASAM Dataset: EV_SMLSNGKUDS A05001
ROD: EV_SMLSNGKUDS_SE36.rod
VCID: 72EBFC26A57EC8B169F-8027
Multi Function Steering Wheel Control Module:
Subsystem 1 - Part No SW: 5K0 959 542 C HW: 5K0 959 542 C Labels: 3C8-959-537.CLB
Component: E221__MFL-TAS H31 0037
Serial number: 0394858
Coding: 820000
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb
Part No SW: 1T0 920 871 D HW: 1T0 920 871 D
Component: KOMBI H20 0420
Serial number: 00000000000000
Coding: 181A00
Shop #: WSC 85046 004 02308
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04086
ROD: EV_Kombi_UDS_VDD_RM09_SE25.rod
VCID: 34673A3E9FEA8681BB3-8061
1 Fault Found:
10485825 - Internal Control Module Memory Check Sum Error
B2000 41 [137] - General checksum failure
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels: 7N0-907-530-V2.clb
Part No SW: 7N0 907 530 AK HW: 7N0 907 530 AK
Component: J533 Gateway X57 X641
Revision: X57 Serial number: 240812F2001728
Coding: 357402
Shop #: WSC 35110 377 00141
VCID: 79F9CB0AF008BBE9285-802C
No fault code found.
-------------------------------------------------------------------------------
Address 20: High Beam Assist. (J844) Labels: 8K0-857-511.clb
Part No SW: 5K0 857 511 C HW: 8P0 857 511 C
Component: FLA H04 0006
Revision: AA001002
Coding: 0401856B74745D545420363E00
Shop #: WSC 00485 046 02308
VCID: 2E53285679C6AC51CD7-807B
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels: 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H20 0420
Serial number: 00000000000000
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03008
ROD: EV_Immo_UDS_VDD_RM09_SE25.rod
VCID: 6ADBE4468DAE0071D1F-803F
No fault code found.
-------------------------------------------------------------------------------
Address 2E: Media Player 3 (J650) Labels: 5N0-035-342.lbl
Part No SW: 5N0 035 342 G HW: 5N0 035 342 G
Component: SG EXT.PLAYER H19 0770
Revision: A1001003 Serial number: 7665894085
Coding: 020100
Shop #: WSC 05314 000 00001
VCID: 2B5521424AD4D979EA9-807E
No fault code found.
-------------------------------------------------------------------------------
Address 37: Navigation (J794) Labels: 1K0-035-27x-37.clb
Part No SW: 3C0 035 279 M HW: 3C0 035 279 M
Component: RNS315-EU H52 0319
Serial number: VWZAZ2M5981505
Coding: 000004110200000000051002
Shop #: WSC 00485 046 02308
ASAM Dataset: EV_RNS315EUV2UDS 001705
ROD: EV_RNS315EUV2UDS.rod
VCID: 2D512F5A7CC0D749F4D-8078
Data medium:
Subsystem 1 - Part No: 3AA 919 866
Component: EUR_W_0038 0038
No fault code found.
-------------------------------------------------------------------------------
Address 42: Door Elect, Driver Labels: 1K0-959-701-MIN3.lbl
Part No SW: 1T0 959 701 T HW: 1T0 959 701 T
Component: Tuer-SG 009 2109
Coding: 0000048
Shop #: WSC 35110 377 08192
VCID: 489F7ECE3B621261E7B-801D
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 1Kx-909-14x-44.clb
Part No: 1K0 909 144 P
Component: EPS_ZFLS Kl. 140 3305
Revision: 00H22000
Shop #: WSC 35110 377 08192
VCID: 377D0D32469C6D999E1-8062
No fault code found.
-------------------------------------------------------------------------------
Address 4C: Tire Pressure II
Cannot be reached
-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. Labels: 1K0-959-702-MIN3.lbl
Part No SW: 1T0 959 702 R HW: 1T0 959 702 R
Component: Tuer-SG 009 2109
Coding: 0000048
Shop #: WSC 35110 377 08192
VCID: 479D7DF2367C1D19EE1-8012
No fault code found.
-------------------------------------------------------------------------------
Address 55: Headlight Range (J745) Labels: 5M0-907-357-V3.clb
Part No SW: 5M0 907 357 F HW: 7L6 907 357 C
Component: AFS-ECU H04 0111
Revision: -------- Serial number: --------------
Coding: 091600000F000200
Shop #: WSC 00485 046 02308
ASAM Dataset: EV_HeadlRegulVWAFSPt 002016
ROD: EV_HeadlRegulVWAFSPt.rod
VCID: 377D0D328E9C6D999E1-8062
Left_headlamp_power_output_stage:
Subsystem 1 - Part No SW: 1T0 941 329 A HW: 1T0 941 329 A
Component: LeiMo links H06 0007
Coding: 320000
Right_headlamp_power_output_stage:
Subsystem 2 - Part No SW: 1T0 941 329 A HW: 1T0 941 329 A
Component: LeiMo rechts H06 0007
Coding: 320000
5 Faults Found:
12583424 - Databus
U1201 00 [008] - No Communications
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 254
Reset counter: 142
Mileage: 54138 km
Date: 2014.11.03
Time: 21:07:06
13705474 - Databus
U1121 00 [008] - Missing Message
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 6
Reset counter: 142
Mileage: 54138 km
Date: 2014.11.03
Time: 21:07:06
13705475 - Databus
U1121 00 [008] - Missing Message
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 6
Reset counter: 142
Mileage: 54138 km
Date: 2014.11.03
Time: 21:07:06
13705477 - Databus
U1121 00 [008] - Missing Message
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 6
Reset counter: 142
Mileage: 54138 km
Date: 2014.11.03
Time: 21:07:06
13705480 - Databus
U1121 00 [008] - Missing Message
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 6
Reset counter: 142
Mileage: 54138 km
Date: 2014.11.03
Time: 21:07:06
End-------------------------(Elapsed Time: 02:52)--------------------------
If you again have any suggestions please let me know. Thanks
@AutosoundBlackpool: I have original connectors from Touran and pins from halogens moved to new connectors so it looks OEM.
@stan-the-man: Thanks, I've got the wiring for caddy bixenons + LED and all looks ok. My LEDs when OFF and AUTO they are bright 100% and when in parking light position they are dimmed as well as during the evening/night together with Xenons. They are also OFF when turning signal left/right is ON (when no xenons).
Is there anyone with factory installed xenons+LED or working after retrofitting to place their coding? Maybe the problem is also in coding 55 Xenon Range Module?
-
stan-the-man
- Hyper Poster
- Posts: 1464
- Joined: Tue May 13, 2014 9:41 am
- Engine size/power: 1.4 16V Petrol (74bhp)
- Location: IRL Co.Clare/PL Gdansk
Re: Caddy 2012 bi-xenons with LED
Do you want me to look up my coding so you can try it and see what happens?
Possibly something is not ticked in coding section if you are 100% wiring is done correctly. If you look me up I posted my vcds auto scan in one of my topics about mfsw.
Also regarding high beam assist, is it working ok? I'm actually fitting it to mine in next two weeks. Did you enable it in BCM? What year is your Caddy? So I presume the wiring for it came from touran as your xenon lights?
Possibly something is not ticked in coding section if you are 100% wiring is done correctly. If you look me up I posted my vcds auto scan in one of my topics about mfsw.
Also regarding high beam assist, is it working ok? I'm actually fitting it to mine in next two weeks. Did you enable it in BCM? What year is your Caddy? So I presume the wiring for it came from touran as your xenon lights?
-
stan-the-man
- Hyper Poster
- Posts: 1464
- Joined: Tue May 13, 2014 9:41 am
- Engine size/power: 1.4 16V Petrol (74bhp)
- Location: IRL Co.Clare/PL Gdansk
-
MartyPL
- 100BHP+
- Posts: 173
- Joined: Fri Oct 03, 2014 8:17 pm
- Engine size/power: 1.2 TSI (84bhp)
- Location: Poland
Re: Caddy 2012 bi-xenons with LED
Hi. I found your autoscan. I'm gonna try some of your coding. High Beam Assist is taken from Touran (original harness). It's "ticked" in CAN instruments and in 9 BCM/CECM. No errors as you can see in my autoscan, but I have a warning on dashboard FAULT: LIGHT ASSIST (only few seconds after ignition is on). Now I'm trying to focus on those crazy bixenons and make them work properly after that ... High Beam Assistant;)
UPDATE:
I see one difference in coding 55 Xenon Range Module. In Byte 1 you've got 06 and me 16. We have different rear axle/suspension...something chosen. When I choose 06 it gives one fault I can't erase (I will post it later). I also see that you've got Mid BCM 086S. Your LEDs work ok because you've got pin 10 and 12 in headlight connector bridged? And last thing ... Caddy has only one auto leveling sensor (rear-left), am I right?
UPDATE:
I see one difference in coding 55 Xenon Range Module. In Byte 1 you've got 06 and me 16. We have different rear axle/suspension...something chosen. When I choose 06 it gives one fault I can't erase (I will post it later). I also see that you've got Mid BCM 086S. Your LEDs work ok because you've got pin 10 and 12 in headlight connector bridged? And last thing ... Caddy has only one auto leveling sensor (rear-left), am I right?
-
stan-the-man
- Hyper Poster
- Posts: 1464
- Joined: Tue May 13, 2014 9:41 am
- Engine size/power: 1.4 16V Petrol (74bhp)
- Location: IRL Co.Clare/PL Gdansk
Re: Caddy 2012 bi-xenons with LED
Marty, did you do the whole swap of interior loom/BCM + xenon loom from Touran into your Caddy? or is it just partially??
My BCM is highline for a Caddy and one thing is certain, the Caddy BCM and Touran BCM are wired differently.
I will study the diagrams for both setups (Caddy/Touran) and will see if there is any differences.
Im sure you will sort this
My BCM is highline for a Caddy and one thing is certain, the Caddy BCM and Touran BCM are wired differently.
I will study the diagrams for both setups (Caddy/Touran) and will see if there is any differences.
Im sure you will sort this
-
stan-the-man
- Hyper Poster
- Posts: 1464
- Joined: Tue May 13, 2014 9:41 am
- Engine size/power: 1.4 16V Petrol (74bhp)
- Location: IRL Co.Clare/PL Gdansk
-
MartyPL
- 100BHP+
- Posts: 173
- Joined: Fri Oct 03, 2014 8:17 pm
- Engine size/power: 1.2 TSI (84bhp)
- Location: Poland
Re: Caddy 2012 bi-xenons with LED
Just partially. My BCM is new from VW dealer to Caddy (087 AC - the newest possible). I know that for example Touran has a different pin in BCM for left or right DRL (I don't remember which one - it's not important).
And if we are talking about level sensors ETKA shows only one in 4 versions (short-wheel base/short-wheel base but 4Motion/long-wheel base/long-wheel base but 4Motion). I have short-wheel base no 4Motion. I also asked at VW dealer and they also told me that there's only one (left rear). They were installing my level sensor too. BUT ... Elsa or erWin scheme (the same;)) shows in diagram 39/5 rear left vhicle level sender, front left vehicle level sender, Control unit for cornering light and headlight range control.
The same scheme shows connection from 55 Xenon Range Module (pin 23 to SC13) to fuse box. There is written A199 (Positive connection 4 (15a) in dash panel wiring harness) and then 13B (what does B mean) -> SC13. I know that this question is a bit lame but what CONNECTION 4 means? I know that 15a is start after ignition.
And if we are talking about level sensors ETKA shows only one in 4 versions (short-wheel base/short-wheel base but 4Motion/long-wheel base/long-wheel base but 4Motion). I have short-wheel base no 4Motion. I also asked at VW dealer and they also told me that there's only one (left rear). They were installing my level sensor too. BUT ... Elsa or erWin scheme (the same;)) shows in diagram 39/5 rear left vhicle level sender, front left vehicle level sender, Control unit for cornering light and headlight range control.
The same scheme shows connection from 55 Xenon Range Module (pin 23 to SC13) to fuse box. There is written A199 (Positive connection 4 (15a) in dash panel wiring harness) and then 13B (what does B mean) -> SC13. I know that this question is a bit lame but what CONNECTION 4 means? I know that 15a is start after ignition.
-
MartyPL
- 100BHP+
- Posts: 173
- Joined: Fri Oct 03, 2014 8:17 pm
- Engine size/power: 1.2 TSI (84bhp)
- Location: Poland
Re: Caddy 2012 bi-xenons with LED
It's been a while but we already did it.
When I came here with the problem, three wires in fusebox were connected to 3 (small) fuses (12V when ignition ON). After that we moved wires to constant 12V. It has only added high beams working. Last Saturday we moved these three wires (2 x pins 4 from headlights and 1 from 55 Headlight Range) as stated in erWin/ELSA (pins 4 to fuses 25 and 26 - big fuses and from 55 Headlight Range to Fuse 13 - all 12V when ignition ON nothing connected to a constant 12V) and all started to work as it should. I'm a newbie so I don't know if the problem was in connecting pins 4 from headlight to small fuses or ... well I don't know. But I know that I'm very happy;) after 2 months of thinking, following many forums and so on. Thank you @stan-the-man for all your suggestions!
When I came here with the problem, three wires in fusebox were connected to 3 (small) fuses (12V when ignition ON). After that we moved wires to constant 12V. It has only added high beams working. Last Saturday we moved these three wires (2 x pins 4 from headlights and 1 from 55 Headlight Range) as stated in erWin/ELSA (pins 4 to fuses 25 and 26 - big fuses and from 55 Headlight Range to Fuse 13 - all 12V when ignition ON nothing connected to a constant 12V) and all started to work as it should. I'm a newbie so I don't know if the problem was in connecting pins 4 from headlight to small fuses or ... well I don't know. But I know that I'm very happy;) after 2 months of thinking, following many forums and so on. Thank you @stan-the-man for all your suggestions!
-
stan-the-man
- Hyper Poster
- Posts: 1464
- Joined: Tue May 13, 2014 9:41 am
- Engine size/power: 1.4 16V Petrol (74bhp)
- Location: IRL Co.Clare/PL Gdansk
Re: Caddy 2012 bi-xenons with LED
Marty, great to hear you got it sorted .
I have same fault as you for HBA "fault: light assist" in mine now as I finally managed to wire up the high beam assist mirror.
After doing research on it it seems its all to do with software of BCM. And it looks like it wont work for us...
I came across a German guy who made a module for people who have this issue but he no longer makes them or doesn't want to. Unfortunately it looks like we are stuck unless someone is brave enough to start messing with bits and bytes which I'm not very confident to do.
I'm actually looking at swapping my bcm with touran one which involves swapping some wires etc. and is not guaranteed to fully work as there probably won't be sliding doors option or rear left/right boot doors etc. Its two different BCMs all together so it won't be just a straight swap
. I have same fault as you for HBA "fault: light assist" in mine now as I finally managed to wire up the high beam assist mirror.
After doing research on it it seems its all to do with software of BCM. And it looks like it wont work for us...
I came across a German guy who made a module for people who have this issue but he no longer makes them or doesn't want to. Unfortunately it looks like we are stuck unless someone is brave enough to start messing with bits and bytes which I'm not very confident to do.
I'm actually looking at swapping my bcm with touran one which involves swapping some wires etc. and is not guaranteed to fully work as there probably won't be sliding doors option or rear left/right boot doors etc. Its two different BCMs all together so it won't be just a straight swap